Transport Mode Guide
What is Transport Mode
Transport Mode is a low-power protection mode designed for L1 bike transportation, handling, and storage.
When Transport Mode is enabled:
- The bike powers off automatically.
- Riding functions are disabled.
- The bike provides a notification beeping.
Note: The bike is delivered in Transport Mode to prevent accidental operation during transportation. Exit Transport Mode before first use.
Enable Transport Mode
Before You Start
Make sure:
-
The bike is stationary (speed = 0).
-
The kickstand is retracted.
-
The charger is disconnected.
How-to
1. Tap Settings.
2. Scroll down to locate Inspection.
3. Tap Transport Mode.
4. Confirm the pop-up message.
5. Wait until the bike powers off and plays the notification sound.
Exit Transport Mode
1. Make sure your bike is powered off.
2. Connect the charger to the bike's charging port.
3. Then connect the charger to the power supply.
The system will automatically exit Transport Mode.
4. Press and hold the Power button or use NFC key to power on your bike.
5. Check if the beeping still exists.
When to Use Transport Mode
Transport Mode is recommended for:
-
Transportation before bike delivery.
-
Bike handling or warehouse movement.
-
Long-term storage.