View Rear Traffic with Your Vision Unit

This tutorial applies to L1s. Make sure Vision Unit is properly installed and connected first. Refer to L1-Vision Unit Installation

1. Enable camera access:

- Tap Settings > About.

- Toggle Camera on.

2. Open the Ride page, the rear view screen displays by default.

Notes

1. If no Vision Unit is connected, the rear view screen is unavailable.

2. If a Vision Unit is connected but camera access has not been enabled, the rear view screen displays the default system background. Follow the on-screen instructions to enable camera access in Settings.

3. If the Vision Unit is connected but the camera is disconnected from the display, the rear view screen shows no video signal, and an OBD notification indicates that the camera is disconnected.